RETHINKING POWER AND SIGNAL DISTRIBUTION
xtremeDB® is the ultimate mobile solution for both on-highway and off-highway system applications with I/O signal and power distribution needs of up to 52 Amps. This family of distribution blocks takes advantage of DEUTSCH connections to achieve IP67/IP69K ratings, and pin-level LED diagnostics make for improved field serviceability. With these blocks installed in your vehicles, spiderweb harnesses will be eliminated to significantly reduce your wiring efforts, and your cable runs to each device will be considerably shorter.
The three variants of the active family include CAN J1939, CANopen, and DPLogic, the latter of which has a built-in controller. With DPLogic, the block becomes a main controller/PLC for either the system or for distributed logic. When controlling for distributed logic, you can process commands for sub systems, which reduces the load on the CANBUS. In addition to short circuit and overcurrent protection, a complete set of fault codes is shown via port- and module-level LED's, and these codes are broadcasted on the CAN to trigger fault messages on the display so operators can quickly identify possible problems on the machine.
The trademark DEUTSCH is owned by the TE Connectivity Ltd. family of companies.
8 IN/8 OUT COMBO BLOCK: J1939
8 IN/8 OUT COMBO BLOCK: CANOPEN
INPUT BLOCK: CANOPEN
OUTPUT BLOCK W/ PWM: CANOPEN
OUTPUT BLOCK W/ PWM(I): CANOPEN
DISCRETE OUTPUT BLOCK: DPLOGIC
8 IN/8 OUT COMBO BLOCK: DPLOGIC
INPUT BLOCK: J1939
OUTPUT BLOCK W/ PWM: J1939
OUTPUT BLOCK W/ PWM(I): J1939
DISCRETE OUTPUT BLOCK: J1939
DISCRETE OUTPUT BLOCK: CANOPEN
PVG VALVE DRIVER BLOCK: J1939
Passive modules and a CAN splitter make up the rest of this diverse family. The passive set provides a simple way to improve connectivity by reducing the need for a harness or terminal strips, but since it is completely passive, and thus does not require any programming, these components are easy to integrate into existing systems with a controller, as well as into any systems that might use button, switch, or relay controls.
PASSIVE BLOCK SEPARATE: PNP
PASSIVE BLOCK COMMON GROUND: PNP
PASSIVE BLOCK COMMON W/O LEDS
10 PORT CAN SPLITTER
PASSIVE BLOCK COMMON POWER: NPN
PASSIVE BLOCK SEPARATE W/O LEDS
xtremeDB Passive Block System Layouts
REQUEST DBC FILES
ORDER FULFILLMENT WITH MURRELEKTRONIK
Data Panel Corporation is the mobile controls branch of Murrelektronik Inc., and orders of this product are fulfilled with the close cooperation of both companies.